MobileBlack 200W solar system complete set

200W MobileBlack Caravan complete system This complete system contains everything you need to charge your mobile batteries.
In addition to charging your on-board battery, the dual regulator included in the set also allows you to charge the starter battery at the same time, as it has a corresponding auxiliary charging output.
The scope of delivery includes extensive information material in which the installation and connection are explained step by step – this applies to the technical connection as well as the bonding of the retaining spoiler and the roof bushing.
The roof duct is probably one of the most critical points, as this is where the transition to the inside of the motorhome takes place.
The feed-through is made of the same material as the spoiler – the PEG screw connection corresponds to protection class IP68 and is therefore absolutely waterproof when installed correctly.

• Scope of delivery of the MobileBlack 200W caravan solar system 2x Offgridtec® OLP solar module 100W 12W PERC with shingle technology 1x Offgridtec ABS cable gland 1-fold – black with waterproof PEG screw connection 2x Offgridtec 55cm ABS mounting profiles (1 pair) – for fastening the solar modules in black 1x Offgridtec 8m 2x6mm H07RNF – connecting cable solar module to solar charge controller in caravan version 1x Offgridtec 1,5m 2x6mm 30A battery connection cable – connection cable solar charge controller to battery with battery terminal clamps and M8 cable lug connection 1x Offgridtec® 30A MPPT Dual solar charge controller with auxiliary charge and AES switching output 1x remote indicator / display for MPPT Pro Duo charge controller 1x Dekalin adhesive set with Dekasyl MS-5 polymer adhesive, Dekavator adhesion promoter, cleaning cloth and operating instructions 1x single cartridge of Dekasyl MS-5 adhesive from Dekalin 1x junction sockets for parallel connection of the solar modules 2x MC-4 extension cable 50cm for connecting the connection cables on the module to the junction sockets
  The Offgridtec® MPPT Pro Duo 30A solar charge controller The MPPT Pro Duo controller can process a maximum charging current of 30A.
  This means that this system can theoretically be expanded to almost 400W solar module output. In addition, the device has a secondary charge output via which the starter battery can be charged in parallel with the on-board battery during longer periods of standstill – a feature which is certainly very much appreciated in the mobile home. In order to really speak of the optimum in terms of efficiency, the device also has an AES switching output – this enables the automatic switching of refrigerators with “AES” from gas to 12V operation in the event of excess solar power.

maximum charging current 30A – 390W module power theoretically usable 30A load output for 12V loads directly on the charge controller the clear remote display allows the controller to be mounted in hard-to-reach places in the vehicle without restricting operation and overview of the system parameters AES control signal for car refrigerator, to avoid energy waste 100V maximum PV input voltage Digital circuit control of adaptive three-stage charging mode to improve battery life Max Power-Point Tracking technology with ultra-fast tracking speed and a guaranteed tracking efficiency of at least 99.5% Dimensions: 24.7cm x 16.5cm x 6.9cm (LxWxH) Weight: 1.4KG Self-consumption: 26mA at 12V Active temperature equalization for optimal charging and ensuring long battery life Support for all major battery types (lead-acid, AGM, GEL, LiFePo4) Max.
Efficiency: 98% controllable via Bluetooth (separate dongle art. no. 8-01-011271 required) – ONLY FOR ANDROID DEVICES The 100W OLP solar module with the latest shingle technology The 100W OLP solar module with PERC technology used in the system impresses on the one hand with its unique module design with overlapping wafer arrangement (overlapping design), and on the other hand with its high module efficiency, which makes this module particularly interesting for applications on vehicles due to the limited space available.
Module voltage (Vmp): 18.7V Max.
Max. current (Imp): 5.35A Open circuit voltage (Voc): 22.1V Short circuit current (Isc): 5.67A Cell efficiency: >23% Ambient temperature: -40°C – +85°C Temperature coefficient power: -0.43 %/°C Temperature coefficient voltage: -0.34 %/°C Temperature coefficient current: -0.05 %/°C Weight: 6.09KG Dimensions: 988mm x 560mm x 35mm Protection class junction box: IP68 (waterproof) Length of pre-assembled connection cable: 55cm Pre-assembled connectors: MC4 compatible connectors Number of cells: 108 (6×18) The professional solar mounting system Spoileprofile is the first choice for caravans and motorhomes in particular when it comes to neatly mounting solar modules. If you mount the modules in the direction of travel, wind noise is no longer an issue (this also applies to alcove vehicles). The closed design of the spoilers also prevents branches or similar from getting caught under the solar modules. Spoiler dimensions: L x W x H: 55cm x 8.9cm (of which approx. 3cm support surface module per spoiler) x 6.5cm. Bonding Correctly executed bonding is superior to any screw connection in tough motorhome or boat use. A strength of more than 4 N/mm2 can be achieved on painted or GFRP surfaces, which would be a value calculated on the adhesive surface that could never be achieved with a screw connection in the thin aluminum or GFRP substrate layer. This glue set allows even a layman to create an absolutely firm connection between spoilers and the respective substrate. The Dekalin adhesive set contains all the components necessary for even the do-it-yourself installer to make a professional connection. Stainless steel screws for fastening the solar modules are included, as are detailed bonding instructions. In addition, you only need a standard hand lever press for cartridges and a lint-free cloth. The ABS mounting profiles Cable feed-throughs from the roof to the interior are always quite tricky, as it must be ensured that everything is and remains absolutely tight even after years. After all, even the slightest water ingress can lead to often irreparable damage to the interior insulation and furnishings. Especially since the moisture is often noticed quite late. For this reason, the roof bushings were developed: The housings are made of the same UV and weather resistant material as the mounting brackets offered in the online store. They are extremely stable and absolutely sure-footed. The wide adhesive edge ensures an optimal seal. The feedthroughs are glued with the adhesive set that you also use to glue on the solar mounting brackets. The housings can also be painted as desired and thus adapted to the surface on which they are to be mounted The professional cabling set All necessary cables are supplied plug & play and are already pre-crimped with specialist tools. So you don’t need to buy special pliers for the MC-4 connectors.